The 'solo' model works autonomously and does not require any adjustments
On / Off button
Speed control button
The electrical contacts of the two buttons (On /Off and Speed control) can also be wall mounted.
This unit can also be connected with a timer.
In the case of installing several units, the units should be mounted as far apart from each other as possible. This ventilates the entire living space, making the most effective effect of the ventilation system. One unit covers approx. 30m² of living space.
The regenerator can be installed in homes and, generaly, in domestic and public places. dhe product is provided with a heat exchanger of ceramic type that accumulates heat during the air extraction from the room, while during the release of air from the outside, the device transfers the heat stored in the exchanger, to the incoming air. dhe product must be installed at the wall. The tube inside of which the ceramic exchanger is positioned, is equipped for walls with a maximum of 400/500mm of thickness͖ the tube can be shortened to a minimum of 250mm.
Intake flow scheme
Discharge flow scheme
The product is constituted by a main operating unit with wall joint to be placed inside the room, a recessed tube containing the ceramic exchanger and filters, an external conveyor with wall joint.
|Parameter description||Measurement units||Values|
|Air flow at maximum speed||m3/h||60|
|Efficiency of the ceramic regenerator||%||93|
|Noise level at maximum speed (3m)||dB(A)||24|
|Noise level at minimum speed (3m)||dB(A)||18|
|Operating temperature||°C||-20°C +50°C|
|Absorbed power||W||4,9 - 8,9|
|Filtering class EN 779||–||G3|
|Power supply||V/Hz||230 Vac – 50 Hz|