Window reveal
4 March 2020
Show all
ambientika (2)

Ambientika eco


SKU: 4893273177366-1-1. Category: .

General characteristics

The 'solo' model works autonomously and does not require any adjustments

  • 2pcs G3 filter included
  • ceramic heat exchanger with an efficiency of up to 93%
  • suitable for a single room
  • compact, versatile, and easy to use
  • made of high-quality resistant materials of aesthetic excellence
  • double separate filters for entering and outgoing air, easily removable and washable
  • no condensate discharge required
  • adjustable aspiration speed with a capacity of up to 60m3/h
  • length up to 500mm
  • alternated extraction and introduction flow
  • electronically commutated motor (Brushless)
  • reduced power consumption
  • silent operation
  • the direct ejection devices are to be installed on the perimeter walls of the building, and they have a duct with a length varying from 250 to 500mm
  • it is possible to duct the exhaust air with a tube of the same diameter to a distance of up to 3 meters. For ducting the exhaust air with the necessity of deviation, the maximum length of the duct (including a 90° bend) will be of 2.5 meters
  • simple ventilation system that does not require ducts
  • easily removable and washable filters and heat exchanger
  • usable for replacement of an existing ejector with minimal intervention


On / Off button
Speed control button

The electrical contacts of the two buttons (On /Off and Speed control) can also be wall mounted.

This unit can also be connected with a timer.


In the case of installing several units, the units should be mounted as far apart from each other as possible. This ventilates the entire living space, making the most effective effect of the ventilation system. One unit covers approx. 30m² of living space.



The regenerator can be installed in homes and, generaly, in domestic and public places. dhe product is provided with a heat exchanger of ceramic type that accumulates heat during the air extraction from the room, while during the release of air from the outside, the device transfers the heat stored in the exchanger, to the incoming air. dhe product must be installed at the wall. The tube inside of which the ceramic exchanger is positioned, is equipped for walls with a maximum of 400/500mm of thickness͖ the tube can be shortened to a minimum of 250mm.

Intake flow scheme


Discharge flow scheme



The product is constituted by a main operating unit with wall joint to be placed inside the room, a recessed tube containing the ceramic exchanger and filters, an external conveyor with wall joint.

Parameter description Measurement units Values
Air flow at maximum speed m3/h 60
Efficiency of the ceramic regenerator % 93
Noise level at maximum speed (3m) dB(A) 24
Noise level at minimum speed (3m) dB(A) 18
Operating temperature °C -20°C +50°C
Absorbed power W 4,9 - 8,9
Filters included 2
Filtering class EN 779 G3
Power supply V/Hz 230 Vac – 50 Hz
Protection IP44